HomeWiki source code of Prusa Slicer
Version 7.3 by Josh McGee on 2025/10/20 03:08
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | {{expandable expandByDefault="true" summary="Upon first setup"}} | ||
| 2 | 1. Download PrusaSlicer from prusa3d.com (no need to create an account) | ||
| 3 | 1. On first run, the configuration assistance will appear. (No need to create an account. You can skip the login page.) | ||
| 4 | 1. In “Configuration sources”, select only “Prusa FFF” and “Other FFF”. | ||
| 5 | 1. Add MCI’s Prusa printers: i3 MK3, i3 MK3S, and i3 MK2S, all with 0.4mm nozzle and without MMU. | ||
| 6 | 1. In “Other FFF”, select only Creality. | ||
| 7 | 1. Add Creality Ender-3 with 0.6mm nozzle, Ender-5 with 0.4mm nozzle, and CR-5 Pro H with 0.4mm nozzle. | ||
| 8 | {{/expandable}} | ||
| 9 | |||
| 10 | === Load your file === | ||
| 11 | |||
| 12 | |||
| 13 | If you have a .stl, .obj, .step, .amf, or .3mf file, use the | ||
| 14 | File > Import > ImportSTL/3MF/STEP/OBJ/AMF command | ||
| 15 | |||
| 16 | [[image:Screenshot 2025-10-20 135757.png||data-xwiki-image-style-alignment="center" height="290px" width="500px"]] | ||
| 17 | |||
| 18 | === Select your print settings === | ||
| 19 | |||
| 20 | 1. ((( | ||
| 21 | Set the layer height using the Print Settings dropdown to be 0.2 by default. | ||
| 22 | |||
| 23 | If you select smaller values then that will allow you to print finer details but the print will take longer. | ||
| 24 | |||
| 25 | If you select larger values then your print will have less detail, but it will be faster. | ||
| 26 | ))) | ||
| 27 | 1. ((( | ||
| 28 | Set the filament type using the Filament dropdown. This should be written on the side of the filament reel. | ||
| 29 | ))) | ||
| 30 | 1. ((( | ||
| 31 | Set the printer type using the Printer dropdown. This should be written on a wooden card in front of the printer you're using. | ||
| 32 | ))) | ||
| 33 | |||
| 34 | |||
| 35 | |||
| 36 | |||
| 37 |